“How do I connect a HDMI cable to my PS3? I was using the regular red/yellow/white cables before and it’s still plugged in but I’m not sure if I’m getting anything to the PS3 through my HDMI cables.”
The PS3 has a auto-detect feature that detects which connection is being used and will set it as default.
Auto-Detect PS3 Connection:
- Disconnect any previous cables you were using for the PS3
- With PS3 off connect the HDMI cable to the PS3 and the TV
- Hold down the PS3 power button, it will beep once but keep holding down the power for another 5 seconds till you get another beep
- If all went well the PS3 should be set to the HDMI connection
If the above did not work than do it manually.
Manually Connecting PS3 HDMI:
- Connect both the AV cables (white/red/yellow) and HDMI cables to the TV and PS3
- Now turn on the PS3 and go to the “Settings” and then “Display Settings” then “Video Output Settings”. Select “HDMI”
- Now we need to do the same for the audio. Go to “Settings” > “Sound Settings” > “Audio Output Settings” and change it to “HDMI”
Now you can enjoy the PS3 in glorious high definition with HDMI.
{ 1 trackback }
{ 12 comments… read them below or add one }
This was the best explaination I found on the web to set up my PS3 for HD. Thanks.
I have done both and my PS3 still will not work unless the AV cable is connected.
we tried three websites, this was the best clear to the point and worked first time
thanks
Haaa I tried other websites to configure the HDMI and even tried youtube… however, this one is the best: very clear and simple. Thanks a lot!!!
thank you thank you.. worked the first time..
This website was very useful in setting up my PS3 with HDMI!
Thankyou
Someone please help this doesn’t work for me. I have tried it all and nothing works. There has to be another fix
thank you so freaking much i was about to be stressed out not knowing how to switch from hdmi to av cable cords!!! sadly, my hdmi cord blew from a shortage so i have to use the av cable cords for now. Glad i ran into this website! It was just one easy step to do and i don’t think i would have figured it out no time soon b/4 this site.
Thanks you guys!
i have tried this both ways and, although this worked for me last time i set up my ps3 with the HDMI when i first got my ps3 it now does not. both ways, i switch onto the HDMI channel and the screen is blank/black for about 20 seconds and then turns blue with “no signal” written on the screen. my tv has 2 HDMI ports on it and i have tried with both. there is nothing wrong with my ps3, it works with the VGA cables. is it my tv, is it my hd cord, is it my ps3, or am i jut retarded at setting stuff up?
I ,like a few of the other posters, can’t get a picture via HDMI. System works fine with cables, but not HDMI. The HDMI used to work fine until a thunderstorm. I had tech come out to look at the TV. He tested the TV and the HMDI inputs all worked fine. However, all my components (A/V Receiver, PS3, and HD cable boxes) did not work with HDMI anymore (all of these work with component cables). The tech explained that the lightning storm caused an issue with software on the boards (EPROM). This software is needed for the handshakes to work with HDMI devices. I got a new cable box, but I still don’t know how to fix the software with AV receiver or PS3. I may need EPROM chips. If anyone is knowledgable on the subject, please post a reply.
BTW, all my devices were hooked up thru a surge protector. The tech advised this is a common problem, and recommends unplugging if lighting is nearby.
Okay i did this and it works
but i dont want the sound coming out of my tv, i want it to come out of the surround sound which is right next to my Ps3
how do i set the sound as well ?
i have a spare set of Ps3 Cables(AV composites)